Invoice Payment Terms for Contractors: What to Use and How to Word Them

By GuestMargin Editorial Team · Updated

For educational purposes. How we review →

Part of our Contractor Guides

Invoice Payment Terms for Contractors: What to Use and How to Word Them

Invoice payment terms tell the client when payment is due, how to pay, what deposit or payment schedule applies and what happens if they pay late. For small residential jobs, a common setup is a deposit on signing plus “due on receipt” or net 7 to net 15 for the balance. Commercial clients often expect net 30.

Here is a point that is easy to miss: payment terms are set at the estimate, not the invoice. Terms that first appear on the invoice are hard to enforce, because the client never agreed to them. The deposit, the payment schedule, the due date and any late fee belong in the signed estimate or contract.

That is why this guide pairs with our step-by-step estimate guide. Below you will find what each common term means, which ones fit which jobs, deposit and late-fee rules that vary by state, and sample wording you can adapt.

What Are Invoice Payment Terms?

Invoice payment terms are the written conditions for paying a bill: the due date (such as due on receipt or net 30), accepted payment methods, any deposit or staged payments, early payment discounts and late fees or interest. For contractors they should match what the client signed on the estimate or contract.

Whether you send an estimate, a quote or a bid (here is how bids differ from quotes and estimates), the terms section should travel with it. When the client signs, they agree to the price and to how they will pay it. The invoice then restates those terms; it does not invent them.

Good terms say how much is due and when, by what calendar date, how the client can pay and what happens if payment is late.

Common Payment Terms Explained

The most common invoice payment terms are due on receipt, net 7, net 15 and net 30 (payment due that many days after the invoice date), 2/10 net 30 (a 2% discount if paid within 10 days), a 50/50 split, progress payments tied to stages, and COD (payment at delivery or completion).

Common invoice payment terms at a glance: Due on receipt; COD; Net 7 / net 15; Net 30; 2/10 net 30; 50/50
Common invoice payment terms at a glance. Summary of the table in this guide.
TermWhat it meansCash-flow effect for youTypically fits
Due on receiptPay when the invoice arrivesFastest, though “receipt” is vague; add a dateService calls, small repairs
CODPay at completion or deliveryFast; requires collecting on siteOne-day jobs, new clients
Net 7 / net 15Due 7 or 15 days after invoice dateShort wait; common for homeownersResidential jobs with a known client
Net 30Due 30 days after invoice dateA month of float you financeCommercial clients, property managers
2/10 net 302% off if paid within 10 days; otherwise full amount in 30Speeds payment at a real cost (see below)Commercial accounts that pay on terms
50/50Half at signing, half at completionCovers materials up frontShort jobs with large material costs
Progress paymentsPayments at agreed stages or percent completeSteady cash on long jobsMulti-week remodels, commercial work

For progress terms on larger jobs, a schedule of values template breaks the contract into billable line items so each payment request is easy to check. If the contract includes retainage (a percentage of each progress payment held back until the job is complete), state the retainage percentage and when it is released in the payment terms, so it is not a surprise on the final invoice.

What do net 30 payment terms mean?

Net 30 payment terms mean the full invoice amount is due 30 days after the invoice date. An invoice dated March 1 on net 30 is due March 31. Write the actual date on the invoice so nobody argues about whether the clock started on the invoice date, the delivery date or the day they opened the email.

What does 2/10 net 30 mean?

2/10 net 30 means the client may take a 2% discount if they pay within 10 days; otherwise the full amount is due in 30 days. On a $5,000 invoice, paying by day 10 costs the client $4,900 instead of $5,000.

Which Payment Terms Should Contractors Use?

Our view on contractor payment terms: for residential work, use a deposit at signing and “due on completion” or net 7 for the balance on short jobs, and staged progress payments on jobs longer than a couple of weeks. Reserve net 30 for commercial clients who require it, and price that wait into the job.

This is a judgment call, not a rule. The reasoning:

  • Ask homeowners plainly for payment at the walkthrough.
  • Don’t finance materials. A deposit or 50/50 split keeps your money out of the client’s project.
  • Long jobs need stages. On multi-month jobs, progress billing keeps cash coming in step with the work.
  • Net 30 is a cost you carry. If a commercial client insists, account for it when you bid the job.

If you price with a markup, remember why markup and margin are not the same number; a slow payer can erase a thin margin.

How Much Deposit Should a Contractor Ask For?

Ask for enough deposit to cover materials you must buy before starting and to secure the schedule slot, within your state’s legal limits. Some states cap residential deposits; California limits home improvement down payments to $1,000 or 10% of the contract price, whichever is less. Other states set different limits or none.

The California Contractors State License Board explains the down payment limit for home improvement contracts. Other states have their own rules, and some have none on deposits.

A practical rule: add up materials you must buy before day one, check your state’s limit, and set the deposit at the lower of the two.

Then bill it properly. Our guide to invoicing a deposit or a final payment shows how to credit the deposit on the final invoice.

This is general information, not legal advice. Deposit limits depend on your state and the type of contract; check your state’s contractor licensing board.

Can You Charge Late Fees or Interest on an Invoice?

Often yes, but the safe practice with late fees on invoices is to put the late fee or interest rate in the signed contract before work starts, and to stay within your state’s limits. Maximum interest rates and late-charge rules depend on state law and sometimes on whether the client is a consumer or a business.

An invoice late fee that first shows up on a past-due invoice is weak, because the client never agreed to it. The same goes for interest on overdue invoices. There is no single national maximum: states set usury limits and late-charge rules differently. Check your state’s statutes or attorney general guidance, or ask a local attorney.

Once you know the rate your contract allows, you can work out the late fee or interest owed on an overdue balance.

Not legal advice. Late fee and interest limits vary by state.

Should You Offer an Early Payment Discount?

Usually not for residential jobs. A 2/10 net 30 discount gives up 2% of the invoice to get paid 20 days sooner, which works out to an annualized cost of roughly 37%. It can make sense with commercial clients who pay on net 30 and when you badly need the cash sooner.

Here is the arithmetic. On a $10,000 invoice:

  • The discount is 2%, or $200.
  • You get $9,800 on day 10 instead of $10,000 on day 30, so you pay $200 to receive $9,800 twenty days early.
  • $200 / $9,800 = about 2.04% for 20 days. There are about 18.25 twenty-day periods in a year, so the annualized cost is roughly 2.04% x 18.25 = about 37%.

That is expensive money. Shorter terms or a deposit get you paid sooner without giving away margin.

Sample Payment Terms Wording

Use short, specific wording that states the amount, the calendar due date, the payment methods and any late fee, and put it on the estimate the client signs. The four blocks below cover a small job, a deposit plus balance, progress payments and a late fee. Have an attorney in your state review them.

SituationSample wording (adapt to your contract)
Small job“Payment in full is due on completion of the work. We accept check, ACH and card.”
Deposit plus balance“A deposit of [amount] is due on acceptance of this estimate to schedule the work and order materials. The remaining balance is due within 7 days of the final invoice date.”
Progress payments“Payments are due as follows: [amount] on signing; [amount] at [milestone, e.g., rough-in inspection passed]; [amount] at substantial completion; balance at final walkthrough. Each payment is due within [X] days of the progress invoice.”
Late fee“Balances not paid by the due date accrue a late charge of [rate or amount, within your state’s legal limit] starting [X] days after the due date.”

Two more lines worth adding:

Sample wording only, not legal advice. Have an attorney licensed in your state review your contract terms.

What Are Prompt Payment Laws?

Prompt payment laws set deadlines for paying contractors and can add interest when payment is late. The federal Prompt Payment Act covers federal government contracts; many states have their own prompt pay acts for public work, and some extend them to private construction. Coverage and deadlines vary by state.

Under the federal rule, when a contract does not set a payment date, payment is generally due 30 days after the agency receives a proper invoice, per 31 U.S.C. 3903. The Act also includes an interest penalty section for late payments.

State prompt pay acts differ on who they cover, how many days the payer has and what interest applies. On public projects or as a subcontractor, look up your state’s statute.

General information only, not legal advice.

How Do You Get Paid Faster?

Put clear terms on the signed estimate, collect a deposit, invoice the same day the work or stage is done, write a calendar due date, accept card and ACH, and send a reminder before and after the due date. Unclear terms and slow invoicing are the delays you control.

  • Invoice on site at the walkthrough.
  • Make paying easy. Card and ACH payments can get you paid faster, but they cost money. For example, Square’s invoice pricing page lists online card payments at 3.3% + 30¢ on its free plan and 2.9% + 30¢ on Square Plus (Square Invoices pricing, checked November 2026; may change). On a $4,000 invoice paid by card on the free plan, that is $132.30.
  • Send a payment reminder 3 days before the due date and the day after.
  • Use software at high volume. See how Joist, Invoice2go and Jobber compare on price and payment fees.

You can write the terms into your estimate and invoice today with our free estimate, invoice and change order maker. It handles deposits and due dates and exports to PDF. Sending, e-signature and online payments are planned for GuestMargin Pro, which is coming soon; you can join the waitlist on the homepage.

Frequently Asked Questions

What payment terms should a contractor use?

For small residential jobs, a common setup is a deposit at signing and payment due on completion or within 7 days. Longer jobs suit progress payments at agreed stages. Commercial clients often require net 30. Whatever you choose, write the terms into the signed estimate or contract, not just the invoice.

What does net 30 mean on an invoice?

Net 30 means the full amount is due 30 days after the invoice date. An invoice dated March 1 is due March 31. Write the exact due date on the invoice to avoid arguments about when the 30 days started, and state any late fee the contract allows.

Can I charge a late fee on an unpaid invoice?

Often yes, if the late fee or interest rate was agreed in the signed contract before work started and it stays within your state’s limits. Rules and maximum rates depend on state law and the type of client. A fee added only after the invoice is late is hard to enforce. This is not legal advice.

How much deposit can a contractor legally require?

It depends on your state and the type of work. California, for example, limits home improvement down payments to $1,000 or 10% of the contract price, whichever is less, according to the Contractors State License Board. Other states set different limits or none. Check your state’s licensing board before setting a deposit.

What does 2/10 net 30 mean?

2/10 net 30 means the client can take a 2% discount by paying within 10 days; otherwise the full amount is due in 30 days. On a $10,000 invoice, early payment saves the client $200. For the contractor, that discount works out to an annualized cost of roughly 37%.

The Bottom Line

Set your payment terms when the client signs, not when you bill. A clear deposit, a calendar due date, a stage schedule for long jobs and a late fee within your state’s rules solve most slow-payment problems before they start. Our guide on how to write an estimate shows where those terms go.

When a balance does run late, use the invoice interest calculator to work out what your contract allows, then send a clear payment reminder with the updated amount.

Scroll to Top